Home › Guides › How to Pass the MD Technician Exam

Guide · Maryland MDE · UST System Technician

How to pass the Maryland UST Technician exam

The MDE Technician test takes 90 percent to pass. Here is how to qualify, what to study, how to get the paperwork timing right, and a four-week plan that gets you there.

90% to pass2nd Tuesday, 1:00 PM3 hours max
90%
Score needed to pass
30 days
Apply before you register
3 hrs
Maximum test time
90 days
To retest without reapplying

Start with the number that matters: 90 percent

COMAR 26.10.06 sets the pass mark for every MDE UST certification test at 90 percent or better. Put another way, you can miss no more than one question in ten. Most trade tests leave you some slack. This one doesn't, and techs with years in the field come up short when they study for it like a 70-percent test.

The material isn't exotic. It's the work you already do: bedding, clearances, slope, notice periods, testing. The catch is that the exam asks for the number in the book, and in the field most of us work from habit. You need to know what the regulation and the standards say, word for word on the numbers, not what your crew usually does.

Make sure you can sit for the test

Before you open a book, confirm you qualify. Under COMAR 26.10.06.02, a UST System Technician applicant needs:

  • At least 2 years of UST system installation experience within the last 36 months, with a company or organization that installs UST systems.
  • Direct involvement in at least 6 separate UST system installation, repair, upgrade or closure events. No more than 3 of the 6 can be closures (COMAR 26.10.06.02 and the MDE UST Certification Program Fact Sheet, March 2024).

MDE's UST Certification Fact Sheet (January 2016) says the application asks, for each job, for the MDE Facility ID number or facility name, the full address, a point of contact and phone number, the date of the work and a short description. You and your employer both sign it. Pull those details from your work orders now. Hunting down six facility IDs the week before a test date is how people lose a month.

Get the timeline right

Paperwork timing trips up more people than the test does.

  • Apply first. COMAR 26.10.06.03 says your completed application has to be in at least 30 days before you register for a test.
  • Then register. The regulation's minimum is 72 hours before the test date, but MDE's March 2024 fact sheet tells you to call about a week ahead. Call early.
  • Test day. MDE gives the test on the second Tuesday of each month at its main office, starting at 1:00 PM, with a maximum of 3 hours to finish (MDE fact sheet, March 2024). Bring a valid government-issued photo ID.
  • Cost. MDE's January 2016 fact sheet says the Department stopped charging certification and recertification fees effective December 21, 2015.

Dates and procedures can change, so check MDE's website before you plan around a particular Tuesday.

Know where the questions come from

MDE's January 2016 fact sheet lists the study materials for the Technician and Remover exams: COMAR 26.10.02 through .10, API 1604 and API 1615, PEI RP100, fiberglass tank manufacturers' instructions, and Steel Tank Institute installation instructions. That's a stack of paper. You don't need to memorize all of it, but you should know what each one covers:

  • COMAR 26.10: Maryland's own rules for installation, release reporting, closure and certification.
  • API 1615: installing underground petroleum storage systems, including excavation, backfill and tank handling.
  • API 1604: closing underground petroleum storage tanks.
  • PEI RP100: recommended installation practice for tanks, piping and equipment.
  • Manufacturer instructions: fiberglass and steel tank handling, pretesting and backfill.

The FuelCert Technician bank splits this into ten parts: material handling and pretesting, excavation, backfill, secondary containment, monitoring devices, piping, cathodic protection, Maryland regulations, tank removal and the certification program. Maryland regulations and tank removal are the two biggest parts of the bank, so give them the most time.

Learn the numbers cold

Most misses on a test like this are number questions. Here are a few from COMAR 26.10 to show what we mean:

  • Underground piping goes on a 6-inch bedding of backfill, with at least 4 inches between pipes, 6 inches from the excavation sidewalls and 18 inches to the ground surface.
  • Unless MDE approves otherwise, piping rises 1/8 inch per lateral foot from the tank to the piping endpoint.
  • Overfill prevention has to shut off flow when the tank is 95 percent full, or alert the driver at 90 percent full.
  • A planned permanent closure needs written notice at least 30 days ahead, and a confirmation with MDE 48 hours before the work starts.

Each of those is an easy point if you know it and a coin flip if you don't. Keep a running list of every number, distance and deadline you hit while studying, and drill it until you can say it without thinking. The Numbers & Timeframes deck in the Maryland app is built for exactly that.

Study plan

A four-week plan

Send your application on day one. The 30-day wait before you can register is your study window.

  1. Week 1: Maryland rules. Read COMAR 26.10.06 (certification) start to finish once. Then work the Maryland Regulations and Certification Program questions and start the Numbers & Timeframes deck.
  2. Week 2: Installation. Material handling and pretesting, excavation, backfill, and piping. Read the explanation and source on every miss, even the lucky guesses.
  3. Week 3: Removal and the rest. Tank removal, secondary containment, monitoring devices and cathodic protection. Call MDE and register for your test date.
  4. Week 4: Test conditions. Take the timed 75-question practice exam in the Maryland app every other day and go over every miss. Keep drilling numbers in between. Aim to score well above 90 percent in practice, so a bad day still clears the bar.

Twenty or thirty minutes a day beats one long Sunday. If you drive between jobs, the MD Audio Flashcards add-on lets you study on the road.

Test-day checklist

  • Valid government-issued photo ID. You won't sit without it.
  • Get there early. The test starts at 1:00 PM.
  • Read every word. Watch for not, except, minimum and maximum.
  • Answer the ones you know first, then go back. With up to 3 hours, you have time to check your work.

If you come up short

It happens. If you score under 90 percent, COMAR 26.10.06.03 lets you register to retest within 90 days without reapplying. If you don't pass within 90 days of the first failed attempt, you have to submit a new application. Use the score report to see where you lost points, and retest while the material is fresh.

Four Rappahannock Petroleum techs studied with FuelCert for the MDE UST Technician exam. All four passed, and three of the four passed on the first try. If you study with us and don't pass, email your score report to info@fuelcertsolutions.net and we'll add a free month.

After you pass

Your certification expires 2 years from the date it's issued (COMAR 26.10.06.01), and you have to carry proof of certification whenever you work on a UST system. To renew, COMAR 26.10.06.04 requires a complete application at least 30 days before expiration, a Department-approved UST course within the last 2 years, and direct involvement in at least 6 installation, repair, upgrade or closure events. Miss that window and you renew under the initial certification rules, which means testing again.

Related: Maryland UST Technician exam prep · Maryland vs West Virginia certification

Studying for the Technician test?

183 Technician questions and 250 flashcards in the Maryland app, with the source on every one. Try 7 free.

Open the Maryland app

Getting a crew certified?

Team plans start at $124.99/mo for 5 techs, so the whole crew studies from the same material.

See team plans

FAQ

Maryland Technician exam questions

What score do I need to pass the Maryland UST Technician exam?
You need 90 percent or better, so you can miss no more than one question in ten. COMAR 26.10.06 sets that pass mark for every MDE UST certification test.
How far ahead do I have to apply?
Your completed application has to reach MDE at least 30 days before you register for a test (COMAR 26.10.06.03). After that, register by phone. MDE's March 2024 fact sheet says to call about a week ahead.
Does MDE charge a fee for the test?
MDE's January 2016 UST Certification Fact Sheet says the Department stopped charging fees for certification and recertification effective December 21, 2015. Check with MDE for current policy.
What happens if I fail?
You can register to retest within 90 days without reapplying. If you haven't passed within 90 days of the first failed attempt, you submit a new application (COMAR 26.10.06.03). If you studied with FuelCert, email us your score report and we'll add a free month.
Is the FuelCert practice exam the same as the real test?
No. The Maryland app's timed 75-question practice exam is built to test you under time pressure. FuelCert questions are original study material written from the same regulations and standards. They are not actual exam questions, and FuelCert is not affiliated with MDE.
How long should I study?
Plan on about four weeks of steady work. The 30 days between sending your application and registering for a test makes a natural study window. Short daily sessions work better than cramming.

Next step

Start studying for the Technician test

Try 7 free questions in the Maryland app. No credit card, nothing to install.

FuelCert Solutions is an independent study tool. It is not affiliated with, endorsed by, or approved by MDE or WVDEP, and our practice questions are not actual exam questions.